+86 15369805074 wl_steven2021@163.com Steven@fengliangpetroleum.com

Facebook
Twitter
Google+
LinkedIn
Pinterest

Cangzhou Fengliang Petroleum Machinery Co.,Ltd
  • Home
  • About us
  • Products
    • Top Drive spare
      • IBOP
      • top drive repair
      • 114729-PL-676-20
      • 30157221 case of cilinder
      • wash pipe
      • Flushing pipe 1200567935
      • Mechanical seal washpipe of TDS DQ500Z honghua
      • wash pipe packing
      • IBOP seal kit
    • Well Control Equipment
      • 29 1/2-500PSI Diverter
      • 49 1/2-5000PSI Diverter
      • Rotate the blowout preventer
      • Hydril MSP DIVERTER BOP 29-1/2
      • NOV 18-15M NXT Ram BOP 11003908-001 spare parts
      • Choke Manifold and Kill Manifold
      • BOP Control System for Surface Mounted
      • Choke Remote Control Panel
      • FY20 FY40Y FY 60Y BOP Handling System
      • GK,GX,Shaffer packing element
      • BOP hose 1-5000PSI
      • Blowout Preventer cameron U type
      • 30“1000psi Diverter
    • Wellhead Equipment
      • Christmas tree
      • 6A valve service X mass tree
      • casing head tubing head
      • pup jonit and swivel joint
      • desander
    • Wellhead Tools
      • Pneumatic Spinner
      • manual slips
      • Elevator links
      • Elevator
      • Manual Tongs
      • Power tong
    • ESP System
      • Motor Lead Extension (MLE )
      • electric submersible pumping system
      • ESP cable
      • Capillary Cable
      • Logging Cable
      • Motor
      • Protector
      • ESP cable penetrator
    • pump unit beam pump
    • Rig Components
      • Hook Blocks
      • land rigs
      • Rotary Tables
      • Faucet
      • winch
      • Mechanical drive winch
      • Drive unit
      • Gear Box
    • BOP test pump BOP test stump
    • couplings pub joints and nipples crossovers centralizer
    • Gauge in oil and gas
    • Mud Pump
      • Mud pump spare
      • F800 F1000F1300 F1600 mud pump
      • Pistons
      • Ceramic liner
      • Fluid end parts
      • gear shaft and gear wheel
    • CAT Volvo Cummins packer Rexroth
    • API 6D ball valve
      • 8" 10" 12" ball valve for diverter
    • Drill tools
      • Drill pipe
      • HWDP
      • Drill Collar
      • Downhole Motor
    • sand pump Centrifuge Vibrating screen
    • Drill bit
      • 26" drill bit
    • pipes and rods
    • Downhole Tools
      • Float ball type Float collar and shoe
      • cement basket
    • bearing
      • roll bearing
      • MB type Bearing
    • Swabbing skid
      • Swabbing unit
    • Fluid valve Solenoid valve
      • Solenoid valve
    • repair Hydundai automobile engine
      • G4FA/C engine
      • Brake pad
      • Steering wheel cover
    • coflexip hose
      • coflexip hose
    • container house
    • Inspection service
      • Measure
      • PT UT MT
      • tensile
      • Pressure test
      • supply API thread gauge
    • water drilling rig
      • 300m water drilling rig
      • water finder auto analysis geophysical detector
    • laser machine
      • fiber laser marking machine
    • Glassware products
      • glass tube
      • borosilicate glass teapot
      • glass cup
      • goblet
      • inspection glass tube glass test tube
    • coffee mug with handle
      • Coffee mug with handle
      • Decal ceramic mug
  • News
    • Company news
    • Industry-news
  • Download
  • F.A.Q
    • Do you have any MOQ limit for rig spare order?
    • Ram blowout preventer function
    • How to deal with the faulty?
    • what brand of BOP and Accumulator service
    • do you know the HRSB rongsheng BOP spare part number
    • Top drive system repair brand and model
    • how to choose BOP control system Koomy
    • how to choose workover rigs
  • Feedback
  • Contact us

News

  1. Home
  2. News
  3. NXT Ram BOP Hai Yang Shi You 981 18-15...

NXT Ram BOP Hai Yang Shi You 981 18-15k

NXT® Ram BOP Operators
14” UltraLock II (B)
The 14” UltraLock II (B) operators are used to close the ram assemblies on drill pipe and
close off the wellbore pressure. The 14” UltraLock II (B) operators require a hydraulic
pressure of 1,500 psi (103 bar) to accomplish sealing the wellbore pressure to the rated
working pressure of the preventers. The 14” UltraLock II (B) operators are located on
either side of the NXT body (see Figure 2-1 on page 2-2). When the rams are hydraulically
closed, the UltraLock II (B) operators automatically lock the rams in the Closed position
and require opening hydraulic pressure to open them. The 14” UltraLock II (B) operator will
lock in an infinite range of closed positions, making it ideal for closing on variable ram
assemblies.
22” PosLock
The 22” PosLock operators are used to close the ram assemblies and shear drill pipe and
close off the wellbore pressure. The 22” PosLock operators require a hydraulic pressure of
5,000 psi (345 bar) to accomplish sealing the wellbore pressure to the rated working
pressure of the preventers. The 22” PosLock operators are located on either side of the
NXT body (see Figure 2-1 on page 2-2). When the rams are hydraulically closed, the
PosLock operators automatically lock the rams in the Closed position.
i i
Although 1,500 psi (103 bar) hydraulic closing pressure is
all that is required to seal off the wellbore to the rated
working pressure of the preventers, the 14” UltraLock II (B)
hydraulic closing pressure, at the owner’s discretion, may
be increased to a maximum of 3,000 psi (304 bar) if
necessary.
LOWER INNER
BALANCE VLV
BIDIRECTIONAL
CAVITY
OPEN
CLOSE
LOWER OUTER
BALANCE VLV
UPPER INNER
BALANCE VLV
UPPER OUTER
BALANCE VLV
OPEN CLOSE OPEN CLOSE
OPEN CLOSE OPEN CLOSE
6 6
8 8
11 11 49 49
15 15 22 22 62 62 54 54
69 69
70 70
BY BY BY BY
B
B
B
Y
Y
Y
BY BY BY2-5
www.nov.com
NXT Ram BOP
Page 2-5 of 16
Introduction
2
UltraLock II (B) Locking System
The UltraLock II (B) locking system incorporates a unique mechanical locking mechanism
within the operating cylinder’s piston assembly that is not dependent on closing pressure
to maintain a positive lock. This locking system utilizes flat taper wedge locking dogs,
carried by the operating piston, which engage stationary flat taper wedge locking rods
located within the operating cylinder to effect the required locking force (see Figure 2-4).
Figure 2-4. UltraLock II (B) NXT Door Assembly
This locking system has been designed to increase the capabilities of NOV blowout
preventers by providing a low maintenance and adjustment-free locking system while
maintaining compatibility with all pipe ram assemblies that the BOP can accommodate.
The UltraLock II (B) locking system will lock on any pipe size within the range of the pipe
ram assembly being used.
Blowout preventers that are equipped with the UltraLock II (B) locking system are locked
automatically in the Closed position each time the piston assembly is closed. The
preventer will also remain locked in the Closed position even if closing hydraulic pressure
is lost or removed.
i i
Opening hydraulic pressure is required to unlock and
reopen the preventer.
Lock Rods
Lock Wedge
Locking Piston
Ram in open position with
poppet valve closed.www.nov.com
2-6
Introduction
2
NXT Ram BOP
Page 2-6 of 16
UltraLock II (B) Locking System Features

All operational components are within the hydraulic operating cylinders.

Different sizes or types of pipe ram assemblies may be freely interchanged. No
adjustments are required.

Pressure ranges of 1,500 to 3,000 psi (103 to 207 bar) will energize the
UltraLock II (B) locking system.

The same hydraulic functions are required to operate the cylinder’s open/close
function also unlock/lock the UltraLock II (B) locking system.

Loss of hydraulic pressure has no effect on the locking mechanism. Once the
operating piston is closed on the pipe, the locks are engaged until opening pressure
is applied. The cylinder will remain locked, preventing the ram assemblies from
drifting and allowing a pressure leak to occur from below the sealed cavity.

Hang-off capabilities up to 600,000 lb (272,155 kg) at full working pressure are
achieved, depending on the type of ram assembly installed (see the section titled
“Drill Pipe Suspension” on page 4-1).
UltraLock II (B) Mechanical Design
The 14” UltraLock II (B) is designed to lock on each closure of the blowout preventer. The
engagement of a wedge device, called a lock wedge, between a lock rod and locking
piston, makes this lock simple and reliable (see Figure 2-4 on page 2-5). The design
utilizes four individual locking assemblies within the piston actuator, located 90 apart.
These assemblies are designed to carry 100% of the load normally carried by the
hydraulic fluid pressure applied to the piston area within the operating cylinder.
22” PosLock Mechanical Design
The 22” PosLock® system locks automatically in one position each time it is closed,
remaining locked even if closing pressure is removed. Opening hydraulic pressure is
required to unlock and reopen the preventer. The PosLock system uses a single set of
locking wedges to achieve the positive mechanical lock. This provides for one locking
position, which is the maximum requirement for standard shear rams. The PosLock
system must be manually adjusted for changes in ram types or to compensate for ram
wear over time.2-7
www.nov.com
NXT Ram BOP
Page 2-7 of 16
Introduction
2
22” PosLock Operators
Two 22” PosLock operators are located on either side of the NXT preventer body
(see Figure 2-1 on page 2-2).
The 22” PosLock operators may be used to shear pipe and close the well in or, as blind
rams, to close off an open wellbore. The 22” PosLock operators do not require the
assistance of booster cylinders to achieve shearing of the drill pipe. The 22” PosLock
operators require the maximum available hydraulic closing pressure to accomplish
shearing the pipe or casing and contain the wellbore pressure to the rated working
pressure of the preventer.
i i
NXT 22” PosLock operators will contain wellbore pressure
of 5,000 psi (345 bar) with 1,250 psi (86 bar) hydraulic
closing pressure, wellbore pressure of 10,000 psi (689 bar)
with 2,500 psi (172 bar) hydraulic closing pressure, and
wellbore pressure of 15,000 psi (1,034 bar) with 3,750 psi
(259 bar) hydraulic closing pressure.
However, the maximum 5,000 psi (345 bar) closing
hydraulic pressure on the NXT 22” PosLock operators
should always be used to shear pipe and casing.
Contact NOV Engineering with the pipe/casing size and
specification to be sheared for the minimum required
hydraulic closing pressurewww.nov.com
2-8
Introduction
2
NXT Ram BOP
Page 2-8 of 16
When the rams are hydraulically closed, the PosLock operators automatically lock the
shear rams in the Closed position and require 1,500 psi (103 bar) hydraulic pressure to
unlock and reopen them. The 22” PosLock operators will remain in the Closed position
and contain the wellbore pressure, even if hydraulic closing pressure is lost or removed
(see Figure 2-5).
Figure 2-5. NXT Door with 22” PosLock Operator
NXT® Boltless Door Locking System
Introduction
The NXT® BOP door locking system enables automatic opening and closing of NXT BOP
doors, representing a major step toward automation of BOP servicing. Several operational
benefits are available from this system, both in surface and subsea applications.
The NXT BOP door locking system departs from the conventional bolting method. The
entire door attachment method can be fully automated using hydraulics to lock, unlock,
open and close the doors. This manual outlines several operational benefits that can be
derived from an automated door access, such as the one described herein.
The NXT BOP door locking system replaces axially-loaded threaded members (bolts) with
transaxially-loaded bearing members. The bearing members act as locking pins, taking
the separation load (generated by wellbore pressure) in bearing and shear only, not in
tension. The bearing members are contained on the BOP body and are moved to engage
the door, providing a pressure containing lock between the body and door. The number of
locking members is reduced to two, running across the top and bottom of the door. This
replaces the threaded member system of four to ten bolts per door. Actuation or
engagement of the two locking members is accomplished simultaneously, dramatically
reducing the opening and closing time compared to the threaded member system, which
requires that each bolt be made up separately.
Locking Wedges
Locking Piston2-9
www.nov.com
NXT Ram BOP
Page 2-9 of 16
Introduction
2
Description
The NXT BOP door locking system utilizes a set of lateral grooves located in both the door
and pressure-containing body running perpendicular to the ram cavity. These grooves,
when aligned, allow load bearing bars to rotate and lock the door and body together. The
groove in the door is configured to allow a semicircular cross sectional shaped locking bar
to rotate over a wide range of motion. The bar can nest into the body groove or rotate to
engage the door groove. Groove pairs and locking bars are located both above and below
the ram cavity spanning the interface between the door and body (see Figure 2-6).
Figure 2-6. Lockbar Grooves
The locking system is actuated using small hydraulic cylinders mounted on the door in the
lock drive assembly. In addition, a hydraulic rotary actuator is mounted on the hinge and
tied into the door to swing the door open and closed, allowing access to the ram
assemblies. See Figure 2-7 on page 2-10 and Figure 2-8 on page 2-11 for components of
each door style.
Door Lockbar Grooves
BOP Body
Lockbar Grooveswww.nov.com
2-10
Introduction
2
NXT Ram BOP
Page 2-10 of 16
Figure 2-7. 22” PosLock Door Operation Components
Lock Drive Assembly
(Surface Application)
Lock Drive Assembly
(Subsea Application)
Safety Latches
Safety Latches
Safety Latches
Safety Latches
Hinge Rotation Assembly
(Surface and Subsea Applications)2-11
www.nov.com
NXT Ram BOP
Page 2-11 of 16
Introduction
2
Figure 2-8. 14” UltraLock II (B) Door Operation Components
The entire door attachment method can be fully automated using hydraulics to lock/unlock
the doors and open/close the doors. The 14” UltraLock II (B) door assembly has the
addition of the hydraulically operated anti-rotation bar for lockbar security. Manual
methods of operation can also be utilized either as the primary means of operation or as a
secondary or back-up method to the hydraulics system for the 14” UltraLock II (B) door
assembly.
NXT door closing sequence is illustrated in Figure 2-9 through Figure 2-12. When the door
is open, the locking bars are rotated to the horizontal position (see Figure 2-9). In this
position, the lobes of the anti-rotation bars are nested into slots in the locking bars, and the
door is free to swing into or out of engagement with the BOP body.
Lock Bar Actuators
and Hydraulic Cylinder
Anti-Rotation Bars Actuator
and Hydraulic Cylinder
Door Open/Close
Rotary Actuator
Hose Bundle Receptacle
i i
The 22” PosLock operator doors use safety latches instead
of anti-rotation bars because PosLock operators are used
to shear pipe or casing and require a much stronger
lockbar (see Figure 2-7 on page 2-10).www.nov.com
2-12
Introduction
2
NXT Ram BOP
Page 2-12 of 16
Figure 2-9. Horizontal Bars
When the door has been fully closed against the BOP body, the locking bars are rotated
65, which engages the bars with the BOP body grooves (see Figure 2-10). This motion

produces a cam-like action that preloads the door seals against the BOP body face.

Related News

Gas Sealing Well Control Equipment Solution

Gas Sealing Well Control Equipment Solution

API 11B Sucker Rod

API 11B Sucker Rod

second hand BOP mud cross drilling spool

second hand BOP mud cross drilling spool

Varco TDS 11SA  Varco TDS 11SA TESCO Canrig TDS top drive wash packing and washing pipeTESCO Canrig TDS top drive wash packing and washing pipe

Varco TDS 11SA Varco TDS 11SA TESCO Canrig TDS top drive wa

how to useDrilling spare parts

how to useDrilling spare parts

Hebei Bolu Tianbao Well Control Equipment Co., Ltd BOP spare.

Hebei Bolu Tianbao Well Control Equipment Co., Ltd BOP spare

Product Categories

  • Top Drive spare
    • IBOP
    • top drive repair
    • 114729-PL-676-20
    • 30157221 case of cilinder
    • wash pipe
    • Flushing pipe 1200567935
    • Mechanical seal washpipe of TDS DQ500Z honghua
    • wash pipe packing
    • IBOP seal kit
  • Well Control Equipment
    • 29 1/2-500PSI Diverter
    • 49 1/2-5000PSI Diverter
    • Rotate the blowout preventer
    • Hydril MSP DIVERTER BOP 29-1/2
    • NOV 18-15M NXT Ram BOP 11003908-001 spare parts
    • Choke Manifold and Kill Manifold
    • BOP Control System for Surface Mounted
    • Choke Remote Control Panel
    • FY20 FY40Y FY 60Y BOP Handling System
    • GK,GX,Shaffer packing element
    • BOP hose 1-5000PSI
    • Blowout Preventer cameron U type
    • 30“1000psi Diverter
  • Wellhead Equipment
    • Christmas tree
    • 6A valve service X mass tree
    • casing head tubing head
    • pup jonit and swivel joint
    • desander
  • Wellhead Tools
    • Pneumatic Spinner
    • manual slips
    • Elevator links
    • Elevator
    • Manual Tongs
    • Power tong
  • ESP System
    • Motor Lead Extension (MLE )
    • electric submersible pumping system
    • ESP cable
    • Capillary Cable
    • Logging Cable
    • Motor
    • Protector
    • ESP cable penetrator
  • pump unit beam pump
  • Rig Components
    • Hook Blocks
    • land rigs
    • Rotary Tables
    • Faucet
    • winch
    • Mechanical drive winch
    • Drive unit
    • Gear Box
  • BOP test pump BOP test stump
  • couplings pub joints and nipples crossovers centralizer
  • Gauge in oil and gas
  • Mud Pump
    • Mud pump spare
    • F800 F1000F1300 F1600 mud pump
    • Pistons
    • Ceramic liner
    • Fluid end parts
    • gear shaft and gear wheel
  • CAT Volvo Cummins packer Rexroth
  • API 6D ball valve
    • 8" 10" 12" ball valve for diverter
  • Drill tools
    • Drill pipe
    • HWDP
    • Drill Collar
    • Downhole Motor
  • sand pump Centrifuge Vibrating screen
  • Drill bit
    • 26" drill bit
  • pipes and rods
  • Downhole Tools
    • Float ball type Float collar and shoe
    • cement basket
  • bearing
    • roll bearing
    • MB type Bearing
  • Swabbing skid
    • Swabbing unit
  • Fluid valve Solenoid valve
    • Solenoid valve
  • repair Hydundai automobile engine
    • G4FA/C engine
    • Brake pad
    • Steering wheel cover
  • coflexip hose
    • coflexip hose
  • container house
  • Inspection service
    • Measure
    • PT UT MT
    • tensile
    • Pressure test
    • supply API thread gauge
  • water drilling rig
    • 300m water drilling rig
    • water finder auto analysis geophysical detector
  • laser machine
    • fiber laser marking machine
  • Glassware products
    • glass tube
    • borosilicate glass teapot
    • glass cup
    • goblet
    • inspection glass tube glass test tube
  • coffee mug with handle
    • Coffee mug with handle
    • Decal ceramic mug

Links

Google.comfacebookTianjin Dongrui Petroleum Machinery Co.,LtdBaidu.com必应BOPoil equipmentyoutube

内页左侧广告1

Mud pump,top drive,Blowout preventer

BOP test pump

LatestPost

  • Hydril MSP DIVERTER BOP 29-1/2
    Hydril MSP DIVERTER BOP 29-1/2
    2025-04-20

Feedback

Contact Us

1817621691

8613512492572

+86 15369805074

wl_steven2021@163.com Steven@fengliangpetroleum.com

admin

MOBILE WEBSITE

Tel:+86 13512492572 Email:wl_steven2021@163.com Copyright © 2013-2022 Cangzhou Fengliang Petroleum Machinery Co.,Ltd All Rights Reserved.

  • Skype.
  • E-mail
  • Whatsapp
  • Inquiry
Inquiry Us Now !
Inquiry Us Now !